EzFlow Hints and Tips
Frozen Primer
In these Winter Months it seems to get colder every year, so when you come to using your products in the morning, you may find the temperature dipped just enough to freeze your EzFlow Primer. Our Primer freezes above zero, so don’t worry if it looks crystallized in the bottle, all it needs is a gentle warm in your hands for a couple of minutes and it will be ready to go with no adverse effects at all.
Try to refrain from opening the bottle until it has completely thawed, as you could damage the brush (or even lose it in the bottle) it thaws very easily with the temperature of your hands in just a couple of minutes.
WARNING: do not heat over a heat source, this is not necessary and could be very dangerous.
Speed Finish
Imagine the scenario:
You have just finished a perfect polish application, your client has been waiting patiently in the waiting area sipping her coffee for 20 minutes, and decides her pedicure is now dry, she proceeds to put on her Uggs, when you hear, 'Oh No!' you guessed it she has smudged her nails...
Well EzFlow Speed Finish is a revolutionary product that will dry any polish application in 6 minutes.
Application:
- Apply your base coat.
- Apply 2 thin coats of chosen polish (if your polish application is too thick nothing will dry it!)
- Apply 1 coat of EzFlow Speed Finish and allow it to penetrate the polish for 3 full minutes.
- Pop the nails under a 36 watt UV light or a desk lamp for 3 full minutes (Your desk lamp may require more time)
Hey presto! your client is Ugg ready!
If your polish is smudging, you may have applied your polish too thick, remember if you are using a good quality polish 2 thin coats will give you the coverage you need.